Request for comment on Tolerance Limit in IS 17261:2022 for Polyester Continuous Filament Fully Drawn Yarns – reg.
Cir(080)/2023 June 19, 2023
Committee:
Dear Sirs/Madam,
Sub.: Request for comment on Tolerance Limit in IS 17261:2022 for Polyester Continuous Filament Fully Drawn Yarns – reg.
This has reference to the IS 17261:2022 on the Polyester Continuous Filament Fully Drawn Yarns. In a recent meeting conducted by BIS to discuss the amendments in the aforesaid specification, some of the user industry was of the viewpoint that the tolerance limit given for the Physical Requirements of Polyester Fully Drawn Yarn (IS attached) is not appropriate and the fabric formed with such yarn will not be of good quality. They opined that the maximum tolerance limit allowed should be in the range of +/- 1%.
Some of the domestic manufacturers who were present during the meeting were of the viewpoint that the tolerance level of +/- 1% is too high as per the prevailing technology being used.
BIS has asked the user industry to give the technical data of the yarn being supplied by their suppliers and also to inform if any overseas/domestic manufacturer is manufacturing the yarn in the tolerance limit being asked by them, so that a decision towards finalizing the tolerance limit can be taken.
To get a wider view on this issue, we request for your inputs in this matter before 22nd June 2023 so that CITI can share a more representative view on this matter.
Placed for your information and necessary action.
Thanking you,
Yours faithfully,
Chandrima Chatterjee
Secretary General
Recent Posts
- Confederation of Indian Textile Industry (CITI) Raises Concerns Over Proposed GST Rate Hike on Ready-Made Garments December 7, 2024
- Cir(094)/2024-December 02, 2024 December 2, 2024
- Cir(093)/2024-November 29, 2024 November 29, 2024
- Cir(093)/2024-November 27, 2024 November 27, 2024
- Cir(092)/2024-November 27, 2024 November 27, 2024
Archives
- December 2024 (2)
- November 2024 (11)
- October 2024 (7)
- September 2024 (9)
- August 2024 (16)
- July 2024 (13)
- June 2024 (21)
- May 2024 (7)
- April 2024 (13)
- March 2024 (9)
- February 2024 (13)
- January 2024 (15)
- December 2023 (7)
- November 2023 (10)
- October 2023 (3)
- September 2023 (8)
- August 2023 (5)
- July 2023 (10)
- June 2023 (11)
- May 2023 (19)
- April 2023 (16)
- March 2023 (17)
- February 2023 (16)
- January 2023 (14)
- December 2022 (11)
- November 2022 (9)
- October 2022 (11)
- September 2022 (13)
- August 2022 (13)
- July 2022 (15)
- June 2022 (13)
- May 2022 (6)
- April 2022 (3)
- March 2022 (1)
- February 2022 (1)
- January 2022 (1)
- December 2021 (1)
- November 2021 (1)
- October 2021 (2)
- August 2021 (4)
- July 2021 (1)
- March 2021 (1)
- February 2021 (2)
- January 2021 (2)
- November 2020 (2)
- October 2020 (1)
- September 2020 (2)
- August 2020 (1)
- June 2020 (1)
- May 2020 (2)
- March 2020 (3)
- February 2020 (3)
- September 2019 (2)
- August 2019 (1)
- July 2019 (1)
- May 2019 (3)
- April 2019 (1)
- March 2019 (3)
- February 2019 (3)
- January 2019 (4)
- December 2018 (1)
- November 2018 (2)
- October 2018 (1)
- September 2018 (3)
- August 2018 (3)
- July 2018 (7)
- March 2018 (1)
- January 2018 (13)
- November 2017 (3)