Request for comments on documents prepared by the Textile Machinery and Accessories Sectional Committee – TXD 14 of BIS – reg.
Cir(059)/2023 11th May 2023
Committee:
Sub:– Request for comments on documents prepared by the Textile Machinery and Accessories Sectional Committee – TXD 14 of BIS – reg.
Dear Sir/Madam,
Greetings from CITI!
This is to inform you all that the Textile Machinery and Accessories Sectional Committee – TXD 14 of BIS have prepared the given below documents:
S No | Document Number | Title | Document Type | Document Link |
1 | TXD 14 (22376) WC | Textiles Picking Nose Boss and Shell For Looms Specification (First Revision Of IS 8138) | Revision of Indian Standard (IS 8138:1976) | click here |
2 | TXD 14 (22379) WC | Textiles Cams Faller Screw for Screw Gill Jute Drawing Frame Specification First Revision of IS 13221 | Revision of Indian Standard (IS 13221:1991) | click here |
3 | TXD 14 (22381) WC | Textiles Spindle for Jute Cop Winding Machine Specification First Revision of IS 11510 | Revision of Indian Standard (IS 11510:1985) | click here |
4 | TXD 14 (22382) WC | Textiles Faller Screws for Jute Drawing Frames Specification First Revision of IS 11512 | Revision of Indian Standard (IS 11512:1985) | click here |
5 | TXD 14 (22384) WC | Textiles Pressing Roller Assembly for Jute Drawing Frame Specification First Revision of IS 12885 | Revision of Indian Standard (IS 12885:1990) | click here |
6 | TXD 14 (22385) WC | Textiles 4b Plastic Pickers Specification First Revision of IS 11933 | Revision of Indian Standard (IS 11933:1987) | click here |
7 | TXD 14 (22388)
WC |
Textiles Picking Cone and Bolt for Looms Specification First Revision of IS 8139 | Revision of Indian Standard (IS 8139:1976) | click here |
8 | TXD 14 (22389) WC | Textiles Loom Pickers Specification First Revision of IS 8545 | Revision of Indian Standard (IS 8545:1977) | click here |
9 | TXD 14 (22390) WC | Textiles Shedding Tappets for Plain Calico Looms Specification First Revision of IS 8875 | Revision of Indian Standard (IS 8875:1978) | click here |
- No. wise salient features of the documents which may require specific attention for valuable comments of members are as below:
- This standard prescribes requirements for picking nose, picking boss, and picking shell for looms.
- This standard prescribes the requirements of double leaf and triple leaf cams (top and bottom) for use in jute drawing frame.
- This standard prescribes the requirements of spindle for cop winding machine in a jute mill.
- This standard prescribes the requirements of faller screws for use in drawing frames in a jute mill.
- This standard specifies requirements for pressing roller assembly for jute drawing frame.
- This standard prescribes the requirements of 4B plastic pickers made from ultra-high molecular weight plastic polymer.
- This standard prescribes requirements for picking cone and bolt for looms.
- This standard covers tolerance on dimensions and mass and requirements for workmanship, finish, etc, of loom pickers made of leather, rawhide, synthetic rubber, plastics, etc.
- This standard prescribes requirements for shedding tappets for plain calico looms.
Members are requested to kindly examine the documents and submit your comments before 30th June in the prescribed format given on the portal so that the same can be taken up with the Sectional Committee for necessary action.
Placed for your kind information and necessary action.
Thanking you,
Yours sincerely,
Chandrima Chatterjee
(Secretary General)
Recent Posts
- CITI Partners with Fair Wear Foundation leverage proposed legislative changes in the EU for Indian T&A Exporters November 6, 2024
- Cir(086)/2024-October 28, 2024 October 28, 2024
- Cir(084)/2024-October 25, 2024 October 28, 2024
- Cir(085)/2024-October 25, 2024 October 28, 2024
- Capacity Building Workshop on Advancing Sustainable and Responsible Business Practices: HRDD and CSDDD – 7th Nov 2024 Bangalore October 28, 2024
Archives
- November 2024 (1)
- October 2024 (7)
- September 2024 (9)
- August 2024 (16)
- July 2024 (13)
- June 2024 (21)
- May 2024 (7)
- April 2024 (13)
- March 2024 (9)
- February 2024 (13)
- January 2024 (15)
- December 2023 (7)
- November 2023 (10)
- October 2023 (3)
- September 2023 (8)
- August 2023 (5)
- July 2023 (10)
- June 2023 (11)
- May 2023 (19)
- April 2023 (16)
- March 2023 (17)
- February 2023 (16)
- January 2023 (14)
- December 2022 (11)
- November 2022 (9)
- October 2022 (11)
- September 2022 (13)
- August 2022 (13)
- July 2022 (15)
- June 2022 (13)
- May 2022 (6)
- April 2022 (3)
- March 2022 (1)
- February 2022 (1)
- January 2022 (1)
- December 2021 (1)
- November 2021 (1)
- October 2021 (2)
- August 2021 (4)
- July 2021 (1)
- March 2021 (1)
- February 2021 (2)
- January 2021 (2)
- November 2020 (2)
- October 2020 (1)
- September 2020 (2)
- August 2020 (1)
- June 2020 (1)
- May 2020 (2)
- March 2020 (3)
- February 2020 (3)
- September 2019 (2)
- August 2019 (1)
- July 2019 (1)
- May 2019 (3)
- April 2019 (1)
- March 2019 (3)
- February 2019 (3)
- January 2019 (4)
- December 2018 (1)
- November 2018 (2)
- October 2018 (1)
- September 2018 (3)
- August 2018 (3)
- July 2018 (7)
- March 2018 (1)
- January 2018 (13)
- November 2017 (3)